The synergic inverter semi-automatic welding machine OMI 175LS allows the parameters to be set manually or using synergy. It is also possible to electronically set the point length, long point welding values or switch the machine to two-stroke or four-stroke mode. Digital V-A meter. Two-roll welding wire feeder. It is possible to connect 3,4,5 m burners with a Euro connector.
The machine is equipped with a digital control board for setting all functions using buttons and displays the welding process on two separate displays. Functions can be set: pre-blow, trip / ramp current, electronic choke setting, burn-in / ramp-down current, afterblow, points, spot welding, 2T, 2T points, 2T pulses, 4T, 4T points, 4T pulses.
The design of the OMI welding machine guarantees high source reliability, excellent welding properties in a wide range of applications. All types of low-alloy and high-alloy steels as well as aluminum and its alloys can be welded using a suitable protective atmosphere.
Possibility of aluminum welding:
Aluminum can be welded by the MAG method only with AlMg5 wire with a diameter of 1.0 mm or 1.2 mm with a torch max. 3 m long equipped with a Teflon bowden cable, branded current tips designed for aluminum welding. The wire feeder must be fitted with a pulley with a U-profile. Welded aluminum parts must have a wall of min. 2 mm.
Aluminum welding accessories tested by OMICRON- welding machines s.r.o. is supplied in sets or individually via OMICRON welding machine dealers.
Loader: Measured at 40 ° C
MIG welding in a protective atmosphere
25% - 175A - 22.75V,
60% - 120A - 20V,
100% - 100A - 19V
Parameters
Weight 16.9kg
Supply voltage 1x230V
Current range MIG 30A - 175A
Dimensions L = 480 x W = 235 x H = 440
The price is for a separate machine
