GAMA 190L

Power supply: 230V
Current range: 10-190A
Load: 100% - 130A

GAMA 190L is a light, compact, portable welding machine for MMA and TIG non-melting tungsten electrode welding in a protective atmosphere with a LIFT ARC touch start. Even the most demanding users will appreciate the ideal characteristics of the welding arc of this machine when welding with a coated electrode. The machine welds very well even when powered by a power plant or via extension cables up to 200 m long with a cross-section of 2.5 mm2 and a voltage drop of up to 40% .GAMA 190L has a wide range of applications due to its properties: metal production, mechanical and steel industry , blacksmithing, construction, maintenance and home workshop. Manufacturer OMICRON - welding machines s.r.o. Třebíč is a guarantee for the provision of warranty and post-warranty service directly in the production plant under above-standard advantageous conditions for users of its products.

The equipment for the MMA method consists of the following functions: HOT START for easier ignition of the coated electrode ANTISTICK prevents the coated electrode from sticking (can be switched off for drying the electrodes or grooving) ARC FORCE possibility to set the stability of the arc SOFT START helps against circuit breakers falling out and burning weak materials during start-up by gradually increasing the current V.R.D. safe voltage at rest (15V)

The equipment for the TIG method consists of the following functions: LIFT ARC touch ignition of the welding arc with low tungsten electrode wear DOWN SLOPE crater filling at the end of the weld (welding current decreases in the set time to the required value) is activated by moving the torch by 8 to 10 mm, while the beginning of the crater filling time is acoustically signaled TIG PULSE possibility to set the pulsation frequency of the welding current (1-500 Hz).

The set parameters are signaled by LEDs and displayed on a clear display.