GAMA 1500A PFC - inverter welding machine series "1000" is designed for welding with coated electrode (MMA) and tactile welding with non-melting tungsten electrode (TIG-LIFT ARC) during assembly work and for the highest load.
GAMA 1500A PFC is equipped with the following functions:
HOT START - for perfect ignition of the welding arc.
SOFT START - the function ensures a slow start of the welding current. This function is best used for basic electrodes. Another advantage is a significant reduction in the formation of slag inclusions, reduction of spatter.
ANTISTICK - to limit the welding current in the event of a short circuit.
Safety voltage V.R.D.
The welding inverter is equipped with a saving mode (switching off the source).
The GAMA 1500A PFC machine is equipped with the PFC system "Power Factor Correction" - power factor compensation, which allows operation on single-phase networks with alternating voltage 1x230V (-61% / + 15%).
Advantages of the PFC function:
1. The machine can be connected to an AC 90V - 265V power supply.
2. The welding machine is suitable for operation on power plants or for very long extension cables due to the very low susceptibility to undervoltage and mains overvoltage.
3. Lower level of electromagnetic interference.
4. Higher efficiency due to which the circuit breaker is not subjected to much stress (the circuit breaker trips later than for devices without PFC).
5. Minimum reactive current loading of the network.
The GAMA 1500A PFC can be used to weld in the following modes:
MMA-HOT
MMA-SOFT
TIG -LIFT ARC
Loader: Measured at 40 ° C:
60% - 150A - 26V
100% - 130A - 25.2V
Fuse: 16A
Parameters
supply voltage: 1x230V (-61% / + 15%)
current range: 10A - 150A
weight: 6.5kg
dimensions: 345x145x225
Note - The price is for a separate machine without welding cables
